When you get your first look at Picasso Nano Amplifiers, you will realize that size really does not matter too much at all. It is amazing and quite unbelievable that such a small piece of music amplifying equipment can have such an amazing output. What’s more, is in addition to fitting your bill ideally, it snugly fits into the biggest or smallest of cars, and the presence is known only when the music blasts non-stop unless your neighbor or co-traveler is complaining about the high decibels bombarding his or her ears. 

You can install the amplifier under the front seat or the back seat, and you’ll still have enough space between the seat and the amplifier for ventilation. What’s more, is the amplifier does not get heated up after a half-hour of continuous music playing at high volume. Thanks to the full range crossovers the amplifier is equipped with, you sense no sound distortion even when the volume is turned up to the maximum. Other sport compact amplifiers use bizarre technologies with pseudo power supplies. Picasso Nanos use tried and tested MOSFET power supplies & tenacious Class D circuitry.

Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn on and off the amplifier. (Hi-Level Input only)

SPECIFICATIONS

- Max Power    1,040 Watts
- RMS Power @ 4Ω    100W x 4
- RMS Power @ 2Ω    130W x 4
- RMS Bridged @ 4Ω    260W x 2
- Remote Gain Control    N/A
- Low Pass Filter    Fixed 80Hz
- High Pass Filter    Fixed 80Hz
- Bass Boost    N/A
- Bass Boost Frequency    N/A
- Subsonic Filter    N/A
- Frequency Response    10-300Hz
- S/N    104dB
- Input Sensitivity    200Mv-6V
- THD    <0.1%
- Operation Voltage    9V-16V DC
- Fuse Rating    30A x 2
- Dimensions: 5" W x 11" L x 1.75" H

Manual