Reference 10001A mono subwoofer amplifier delivers a blistering 1,000-Watts RMS using Class D amplifier topology to ensure cool running and minimal current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio — and Infinity includes RCA-to-speaker wire adapters so you'll make the right connections. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Features:
- Compact size
- High and low level input
- Variable crossover and bass boost
- Low noise and distortion
- Input Level Control
- Full on-board protection
- Phase Switch
- RBC wired remote
- Strappable for up to 2,000 watts of power at 4 ohms
- Class D amp technology
- Turn-on mode

- 1000w RMS / 2000W MAX
- 600 watts RMS x 1 at 4 ohms @ 14.4V
- 1000 watts RMS x 1 at 2 ohms @ 14.4V

- Class D amp technology
- frequency response: 10-320 Hz
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12dB at 45Hz)
- phase switch (0, 180 degrees)
- wired remote level control included
- preamp inputs and outputs
- speaker-level inputs (speaker wire-to-RCA adapters included)
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- Fuse rating 35A x 3
- Dimensiton: WxHxD=320mm x 55.5mm x 180mm
                        WxHxD=12-5/8” x 2-3/16" x 7-1/8”

Whats in the box
- 1 x One Reference 10001A mono subwoofer car amplifier
- 6 x 35A ATO fuses (3 installed, 3 spare)
- 2 x Bare wire-to-RCA adapters
- 1 x Remote bass control module
- 1 x 16.5' Remote control cable (RJ-25 plugs on both ends)
- 2 x Self-tapping screws for remote (M3 x 15mm)
- 4 x Mounting screws (M4 x 53mm)
- 2 x Infinity decals
- 1 x Owner's manual